57397 Retrieves the daytime at a host per RFC 867.
57399 Format is login@hostcomputername
57400 http://www.nwpsw.com/whatsnew.htm
57401 Getting host by name.
57402 Getting host by address.
57404 Sending Finger request.
57406 Connect to the character generator on a host.
57407 Getting CHARGEN server by name.
57409 Use TCP protocol.
57410 Use UDP Protocol.
57413 Connecting to CHARGEN server.
57414 Receiving data from CHARGEN server.
57415 Use to determine the approximate speed of your
\nnetwork connection.
\nConnects to a character generator service per RFC 864.
\n
\nDisplays the first 1024 characters received.
57416 Error: program corrupted--NetScanTools is now terminating.\n\nUninstall, then re-install NetScanTools.\n\nQuestions? Email: support@nwpsw.com
57417 nst32.db
57418 Error 104: NST32.DB was not found in the executable directory.\n\nNetScanTools cannot run.\nReinstall NetScanTools.
57419 Error 105: NST32.DB could not be accessed or was not found.\n\nNetScanTools must have read/write access to all files in the NetScanTools executable directory.
57420 Fatal error reading NetScanTools database.\n\nUninstall, then re-install NetScanTools.
57421 A newer version of NetScanTools is available--see our Web Site.
57423 NetScanTools is running for the first time.\n\nYour trial period starts now.
57425 DB corruption error. Uninstall, then re-install NetScanTools.
57426 A configuration error has been detected while starting NetScanTools. NetScanTools cannot run.\n\nPlease uninstall, then re-install this program.
57429 Error: You are not allowed to set the date forward, install NetScanTools, then set it back to the correct time in order to extend your trial period.
57433 Unable to open hosts file. Uncheck the "Add responding IPs to hosts file" button.
57434 Error creating hosts file.
57435 Your system does not have a hosts file used for local name resolution.\n\nWould you like NetScanTools to create a simple hosts file for you?
57436 http://www.nwpsw.com/nstover30.html
57437 http://www.nwpsw.com/nstover60.html
57438 http://www.nwpsw.com/nstover90.html
57439 http://www.nwpsw.com/nstover120.html
57440 http://www.nwpsw.com/nstover7.html
57441 http://www.nwpsw.com/nstover15.html
57443 Resolving host name by address.
57444 This beta version has expired. Please visit our web site to get the newer version.
57445 Error: No WHOIS query command entered.
57446 Getting WHOIS server by name.
57447 Could not create socket for communication to WHOIS server.
57448 Connecting to WHOIS server.
57449 Sending request to WHOIS server.
57450 Receiving data from WHOIS server.
57451 Windows Sockets DLL not found.
57452 Windows Sockets DLL version 1.1 or newer not found.
57453 Host Computer Name or IP is missing.
57454 Parsing results
57455 Memory Exception receiving data
57456 End IP must be greater than or equal to start IP.
57457 Both start and end IPs must be numeric like 10.0.15.1
57458 Hosts file is 0 bytes long. Nothing to do.
57459 Unable to open hosts file--file not found.\nIf you are using Windows 95, use hosts.sam to create one.
57460 Cannot allocate memory for hosts file.
57461 Error: No hostname or IP entered.
57462 localhost
57463 Retrieves the quote of the day from a host per RFC 865.
57465 Not Available
57466 If you DO NOT currently have an active network connection, press cancel now.
57467 This function pings every IP address between the limits set above.
\nThis function will also ping every IP address in the hosts file.
57468 Invalid IP address returned from name lookup.
57469 Contacting host...
57470 The difference between the time server and this computer exceeds 60 minutes.
57471 Find text in the results window.
57472 Name Server Lookup (Requires a connection to a name server:
\n DNS or WINS etc.)
\n UNIX (tm) equivalent: nslookup
\n Simple Query Examples:
\n www.nwpsw.com
\n 204.122.16.5
\n localhost
\n Simple Query returns translated name, IPs and aliases.
\n
\n
57473 Email: sales@nwpsw.com
\nWeb Site: http://www.nwpsw.com/
\n
\nBrief help by functional client:
\n
\n
57474 Finger
\n UNIX equivalent: finger
\n Display verbose format check box supported by some systems.
\n Proxies supported through setup dialog or by common UNIX proxy
\n syntax: user@host1.com@host2.com
\n Example: nwps@eskimo.com
\n Example: @somehost.com (Returns all users currently logged onto
\n Windows 95/NT 3.51 Microsoft Winsock 1.1 32 bit: automatic
\n Windows NT 4.0: automatic or Winsock 2.0
\n Trumpet Winsock (tm) and compatibles: other
\n These three functions require a static IP. Will not work
\n through TIA or SLIRP or any similar emulators.
\n
\n
57476 Ping
\n UNIX equivalent: ping
\n Examples:
\n www.nwpsw.com
\n 204.122.16.5
\n localhost
\n Determines connectivity with another host by sending ICMP
\n echo requests to the host.
\n
\n
57477 TraceRoute
\n UNIX equivalent: traceroute
\n Example: www.nwpsw.com
\n Example: 204.122.16.5
\n Example: localhost
\n Returns each router/gateway hop on the route to remote host.
\n
57478 Whois
\n UNIX equivalent: whois
\n Example: nwpsw.com
\n For full help type the word "help" (no quotes) in entry box and
\n press query.
\n Returns information about your query from a remote database.
\n Useful in finding the owners of domain names.
\n Default servers:
\n whois.internic.net (USA) or whois.ripe.net (Europe)
\n
\n
57479 What's New at NWPSW
\n Press "Get" for the latest news from us.
\n Also a URL grabber:
\n Example: http://www.nwpsw.com/
\n Returns a raw URL from any http web server.
\n
\n
57480 NetScanner
\n Returns pings from all active remote hosts in the IP range.
\n Example: 127.0.0.1 for start and 127.0.0.10 for finish.
\n You may choose to ignore host unreachable responses from
\n default gateways.
\n You may add responding IPs with host names to your hosts file.
\n It will ping each entry in your hosts file and display
\n the response.
\n Checking the Translate IP to Host Name box does a lookup for
\n each responding IP.
\n
\n
57481 Daytime
\n UNIX equivalent: daytime
\n Example: www.eskimo.com
\n Example: localhost (Windows NT (tm) systems running simple TCP
\n services only)
\n Returns the time of day at the remote host's location.
\n
\n
57482 Quote
\n UNIX equivalent: quote, qotd or cookie
\n Example: www.rmm.com or any Windows NT webserver
\n Example: localhost (NT systems running simple TCP services only)
\n Returns the quote of the day from the remote host.
\n
\n
57483 Services and Protocols Database Tests
\n Tests your Winsock's tcp and udp services or protocols database
\n translation capabilities.
\n This does not test for running services on your machine
\n or any remote machines.
\n
\n
57485 Character Generator
\n Connects to the character generator service on a remote host,
\n if available.
\n Both TCP and UDP are supported. Use to test the speed of your
\n network connection in characters/second.
\n This may be faster than your true connection rate due to
\n data compression.
\n
\n
57486 Echo
\n UNIX equivalent: echo
\n Connects to a remote host and sends the text you enter in the
\n upper window to the host.
\n The host echos it back in the lower window.
\n Both TCP and UDP are supported.
\n
\n
57487 Time Sync
\n Use to synchronize your computer clock to a network time server.
\n Several time protocols are supported.
\n "Query Time" shows the difference in time between your clock
\n and the network server.
\n "TimeSync" synchronizes your clock to the network server clock.
\n Windows NT users must be running as an Administrator to use
\n "Time Sync".
\n Requires your Time Zone and local time to be set within
\n 60 minutes of the correct local time.
\n
\n
57488 IDENT Server
\n This is a fully configurable server which identifies you to
\n other hosts when requested.
\n IDENT service is required by many hosts when you attempt to
\n use FINGER.
\n It is fully configurable and has logging.
\n
\n
57489 Preferences
\n Sets the font preferences for most results output,
\n and all the printed output. Recommend using a fixed spacing
\n font like courier.
\n You can enable/disable the host/IP memory on all tabs and edit
\n the entries in the history lists.
\n
\n
57490 Winsock Info
\n Returns the your Windows Sockets DLL information.
\n
\n
57491 Common error messages:
\n Authoritative Answer: Host not found; no data record was found.
\n Non-Authoritative Answer: Host not found, or possible Name
\n Server Failure. Try again.
\n Valid name format; No hostname or IP data record was found in
\n the Name Server.
\n The attempt to connect was refused.
\n
\n
57492 This font size may be too small for printing the orderform. We suggest using a 'courier new', 11 point font.\nSee Preferences Tab, Font Settings to change the font type and size.
57493 Startup error code 101.
57494 Startup error code 102.
57495 Startup error code 103.
57497 Error 106: problem opening NST32.DB.
57498 Missing default name server. Enter a name server.
57499 Root server missing. Normally, ns.internic.net. should appear here.
57500 Activating name server connection...please wait...
\n
57501 Activating Options...Please wait...
\n
57502 Error getting Name Server address:
\n%s
\n
\nPlease use "Setup" to choose another Name Server.
57503 Advanced Query Setup
57504 Do Advanced Query (full NSLOOKUP query)
57505 Lists Domain Computers registered in Authoritative Name Server.
57507 Select this Name Server to be used when OK is pressed.
57508 Append your domain name to non-fully qualified hostnames.
57509 Recursively query name servers.
57510 Use a virtual circuit connection to a name server.
57511 Select verbose mode output.
57512 Request translation of host's name or IP address.
57513 Request any record type associated with host name.
57514 Request Host Info records.
57515 Request Mail Exchanger records.
57516 Request Name Server records.
57517 Request Start of Authority records.
57518 Advanced Query: Enter a host or an IP and press Adv Query.
\n Use the ANY option in A Q Setup to get all records about a host.
\n Enter the Authoritative Name Server host or IP in
\n A Q Setup/Current Server to get domain records from that server.
\n
\n
57519 List Domain: This works with the Authoritative Name Server
\n (ex. ns.somecompany.com) for the domain in question
\n (ie. somecompany.com)
\n You must find the Auth. name server for the domain, enter it in
\n A Q Setup, enter the domain, then press List Domain.
\n
\n
57520 Note:
\n ICMP packet type 11, Time Exceeded, is returned by an intermediate
\n host when the packet TTL value has reached
\n zero before reaching the final destination host.
57521
\n ICMP packet type 0, Echo Reply, is returned by the final
\n destination host.
57523
\n ICMP packet type 3, Destination Unreachable, is returned when a
\n router cannot route the packet to the next hop.
\n
\n
57524 Error locating hosts file directory/folder.
57525 Error getting whois host [%s] address:
\n%s
57526 Show NetScanTools file versions
57527 SNTP Server is reporting that it is not current synchronized.
57528 Activate the indicated client command.
57529 Exit NetScanTools.
57530 Get help for the displayed tab.
57531 Configure IDENT Server
57532 Edit IDENT Log File
57533 Activate or deactivate the Automatic Pinger.
57534 Analyze Database.
57535 This version of sockets does not support setting the Don't Fragment option.
57536 Setting up resolver with this name server.
57537 Go to NWPS Web site using your web browser.
57538 Go to Qty Discount Chart using your web browser.
57539 Use your default email system to email us.
57540 You must exit and restart NetScanTools for this to take effect.
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61588 Linked %s
61589 Unknown Type
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61829 %1\nUnable to register document.\nThe document may already be open.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
